Audio Technica BP40 Broadcast Mic

£222.50 £267.00 (inc. VAT)

The BP40 Dynamic voice microphone provides natural sound reproduction for a variety of applications - radio, recording, post production ... thanks to its hypercardioid providing optimal isolation of the sound source and excellent off-axis rejection. The 37mm capsule with a patented "floating edges" design optimizes the surface of the membrane and maximizes performance, while the humbucking coil (for noise compensation) prevents the risk of electromagnetic interference (EMI) (generated by the video monitors, power supplies, etc). Due to its robust, all metal construction, the BP40 will be ideal in broadcast environments.

  • Rich, natural condenser-like sound
  • Patented floating-edge construction for optimal performance
  • Humbucking coil prevents electromagnetic interference (EMI)
  • Switchable 100 Hz high-pass filter
  • Multistage windscreen provides superior internal pop filtering
  • Dependable for use in professional broadcast environments
Product Features:
  • Large diaphragm dynamic microphone
  • Hypercardioid directivity with excellent off-axis rejection
  • Very sensitive to plosives ("P", "T") and soft on transitories
  • Conceived and designed for professional broadcast applications. Ideal for radio and post production studios
  • Its Humbucking voice coil prevents the risk of electromagnetic interference (EMI)
  • Optimized positioning of the capsule to keep an impressive vocal presence, even remotely
  • Low-cut switchable filter 100 Hz 6dB / octave;
  • Multilayered windscreen for superior filtration from internal pops
  • Comes with AT8483 clip
  • All metal rugged construction for reliable use in professional broadcasting environments

Element: Dynamic

Polar Pattern: Hypercardioid

Frequency Response: 50 - 16,000 Hz

Open Circuit Sensitivity: -48 dB (3.9 mV) re 1V at 1 Pa

Impedance: 450 ohms

Low Frequency Roll Off: 100 Hz, 6 dB/octave

Switches: Flat, roll-off

Weight: 632g

Dimensions: 164.0 mm long, 56.0 mm diameter

Output Connector: Integral 3-pin XLRM-type

Accessories Included: AT8483 mounting clamp for 5/8”-27 threaded stands; 5/8”-27 to 3/8”-16 threaded adapter; soft protective pouch